The curtain is wrong | Follow this hack to avoid all costs while installing

At face value, hanging curtains is a simple task, but it is one of the jobs that can be frustrating at its best if not done properly. The common mistakes you may face from rushing the job or cutting corners include crooked curtain rods, holes in places they shouldn’t be, or badly aligned panels.

But don’t let that bother This easy, budget-friendly curtain installation hack is going to ensure that you avoid all those classic mistakes and will have you hanging beautiful drapes on the very first try! Be it a seasoned DIYer or just getting into curtains, this post is designed to make the whole process easy, seamless, and budget-friendly.

Why Curtain Installation Often Goes Wrong

Before diving into how to fix the issue, it’s essential to understand why the installation of curtains usually goes wrong. Of all, here are the major reasons:

• Incorrect Measurement: The most common kind of mistakes made is incorrect measurements. Many people make guesses regarding where to put the curtain rod or assume that their windows are perfectly centered. This generally ends up in shades that are not even or rods that are way too high or too low.
• Rushing Through the Process: Speed always comes with an unaccounted loss. You may have been in such a rush to get it over and done with that you couldn’t correct those minute errors if you had started drilling holes in the wall without very precisely having the measurements for the places where nails would go. You end up hanging wonky curtains.
• Poor Tool Selection: Incorrect use of the right tool; an ill-equipped tool may mean using weak drills or anchors that will lead to wall damage or will not allow a rod to hold up well.

Drilling Too Early: If you start drilling before you are sure about the place, you may end up making several holes and thus have an ugly-looking wall. Plus, it will be more costly and time-consuming to patch up those mistakes.

The Ultimate Hack to Avoid All Extra Costs When Installing Curtains

Follow these simple steps so you install your curtains perfectly on the first try without any additional damage, stress, or cost.

1. Always Measure Twice Before You Drill

The golden rule while working on a home improvement project is measuring twice, and when it comes to installing curtains, this carries even more importance.

Measure your window from the top to where you want the curtain rod to sit. Remember, the higher the curtains are, the taller the windows will appear, adding elegance to your room.

Check the width to ensure that the rod extends over the window frame. This way, if the curtains were to fully open, they wouldn’t travel behind a bit of obscuring shade.

• Employ a level to ensure your rod will hang straight. Trying to eye the placement often leads to slightly slanted rods that you may not notice initially but eventually become frustrating to put up with.

2. Test Your Placement with Temporary Hooks

One of the biggest risks of curtain installation is drilling too early. Drilling a hole that’s even slightly off can result in unsightly patches or permanent damage.

Hack? Use temporary adhesive hooks! These hooks are sturdy enough to hold your curtain rod in place temporarily while you test the placement, without having to drill holes. Just attach the hooks where you think the rod should go, hang up the rod and curtains, and then step back to view it all.

When you’re comfortable that this is its place, then you can confidently make the permanent holes, knowing it’s perfectly aligned.

3. Choose the Right Tools for the Job

Don’t frustrate yourself or damage anything; have the right tools on hand to install your curtains. Here’s what you will need:

A stud finder is very helpful if you’re installing curtains in a room that uses drywall. This little contraption finds the real studs behind your drywall. Curtain rods are a great deal more stable when they’re screwing into studs-which is to say, the solid pieces of wood behind your drywall. Using a stud finder ensures you’re drilling in the right spot for maximum stability.

Wall Anchors: No studs where do you want the rod? That’s quite all right! Use wall anchors to reinforce your screws. Wall anchors are specially designed to hold weight in drywall, and they will prevent your curtain rod from pulling out of the wall over time.

• A drill with the right bit: Use a drill with the correct bit size for the screws that come with your curtain rod brackets. A too-small bit will make it hard for you to get the screw in, while a too-large bit will result in loose screws that might not hold up the weight of your curtains.

4. Don’t Rush the Process

Patience is the key to an easy curtain installation. Rushing will only lead to mistakes that may cost a lot and waste a lot of time to fix. Go at a slow pace to ensure everything is well done.

• Check measurements and alignment twice, before making permanent decisions.
• Make sure all the tools are in good condition and you do have everything in good stock.
• It is always easier to avoid any problem than to fix it afterward.

5. How This Hack Saves You Time and Money

These simple steps keep you far away from all kinds of common mistakes that everybody makes while putting up curtains, which lead to additional costs and frustration. Here’s how this hack saves you:

• Fewer Holes in Your Walls: The fact that you test your curtain placement with temporary hooks before drilling means that you won’t make unnecessary holes. Less damage on walls translates to less time patching and repainting later.
• No Wall Damage: The use of appropriate tools, such as stud finders and wall anchors, prevents curtain rods from pulling out of the wall and disallows unsightly cracks.
• No Professional Fees: With these steps, you can install your curtains confidently without paying a handyman, thus saving you a lot of money.

Now you know the secret to hanging perfect curtains! Expensive mistakes can be avoided and beautifully hung curtains enhance your space without any of the hassle.